CB Radios
Ham Radios
Options
Accessories
Antennas
LesComm Kits
Kit Instructions
Hornet Power Supplies
Hornet CW Transmitters
Scanners
Scanner Antennas
Scanner Accessories
Modded, Used & Refurbished Radios
Katzkin
Repair-Mod Orders
Comments
73
Q Codes

Top Gun Tec MD-1 Modulator
Top Gun MD-1
Top Gun MD-1
Item#: md1
$59.99
Major Custom:  To be added to a previous order?: 

Product Description
Product Description Now the same Top Gun Modulator MD-1 and Compressor CP-1 circuits used in the new Magnum radios are available for most other 10-meter and many CB radios. Full tone, clear, high swing audio (AM) modulation is achieved with the addition of these two fully assembled micro circuit boards. While the Top Gun Modulator works only in AM, the Top Gun Compressor works in AM, FM, and SSB keeping the modulation at peak performance in all these modes. Installation is accomplished with the removal of up to 3 resistors and the connection of 7 to 9 pre stripped and tinned wires. Instructions are included for current and past production compatible radios. Additional Web support is available at www.TopGunTec.com. These circuits work with or without the modulation limiter. For the purest, the limiter can be adjusted for excellent forward swing without any square wave audio. Without the limiter the compressor maintains high-level audio without severe squaring of the audio signal. It is the squaring of the audio peaks that create the distortion and splatter of adjacent frequencies. On 30-50 Watt radios, the dead-key or carrier can be set to 2 Watt or less with a modulation swing to the full output potential of the radio transmitter. The modulator can be switched to normal swing with the installation of an optional SPST or SPDT switch. Even in the normal swing mode, the Top Gun Modulator is still working to keep the audio clean at all power levels.

*****
TERMS:

YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.

I BELIEVE IN QUALITY BEFORE QUANTITY! (And from the sales I'm receiving, so do you!)

SO IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! Let me repeat that, IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! I SIMPLY REFUSE TO RUSH MY BUILDS.

Each radio goes through 24 hours minimum of burn-in testing when it's finished. IT WILL BE RIGHT WHEN IT LEAVES MY SHOP!

Normal turn around times;

"Major Custom radio's" 280 to 320 business days.

"Custom/Modified radio's" 45 to 60 business days depending on model.

"Stock/No option radios" are usually 1 to 2 weeks.

Depending on the difficulty of your build or the builds in front of it, this time could be longer.

"Major Custom" in this case means that you have added an option that requires a significant modification(s) to the stock radio that takes more than 3 hours to install. Such as the SP-1a, AD-203, upgrading amp deck, LesComm RCI Noise Filter, etc. are considered Major Custom builds.

"Custom/Modified" examples include LesComm Enhancements, Basic Clarifier mod, Amp Switch, Hi Cut Filter, etc. just to name a few. However if you add a lot of these small upgrades it could move your order to the "Major Custom" category.

"Stock/No option" means just that. These receive only a general tune up.

***Does not apply to Scanners. Scanners ship within 48 hours of purchase.

Customers are taking advantage of the MANY custom options we offer . Depending on the difficulty of your build OR THE BUILDS IN FRONT OF IT, this time could be longer!

There are NO REFUNDS for custom radio, amplifier or power supply orders. NO EXCEPTIONS! NO EXCEPTIONS!

SO BE SURE BEFORE YOU ORDER!

20% restocking fee on "as new, non-customized" radio returns. Radios are built AFTER they are ordered in the order of "payment" received.

AGAIN, THERE ARE NO REFUNDS OR RETURNS ON CUSTOM RADIO, AMPLIFIER OR POWER SUPPLY ORDERS, AND KITS, NO EXCEPTIONS. So be sure BEFORE you order!

This is how it works folks. When you place an order for one of our custom radios we immediately (that day) order the necessary parts needed to build that radio including the donor radio, and set them aside for your build. So we have already invested your money in your order. We do this to prevent coming up short of the parts needed because it was discontinued or changed. (Which happens a lot!) I know this is a long time folks. But I'm only one person. I will work as fast as I can, without compromising quality, to get your order out. So as it says above, if you are an impatient person, do not order from me.

YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.

We very much appreciate your business. And to all of my many, many repeat customers a very special thank you. Tells me I'm doing something right! 73 Everybody! Copyright © LestersCustomTruckShop All Rights Reserved. __________________________________________________________________________________________________________________________________________