CB Radios
Ham Radios
Options
Accessories
Antennas
LesComm Kits
Kit Instructions
Hornet Power Supplies
Hornet CW Transmitters
Scanners
Scanner Antennas
Scanner Accessories
Modded, Used & Refurbished Radios
Katzkin
Repair-Mod Orders
Comments
73
Q Codes

LC994v200p - very limited stock!
LesComm Custom LC994v200
LesComm Custom LC994v200
Item#: lc994v200
$679.99

Product Description
LC994v200 available for ordering now!

200 Watts PEP! Continuous channels. No skips with the +10 switch. LesComm Deluxe Clarifier. +5 / -5 BLUE DISPLAY RX/NB/AGC Schottky diode upgrade Blue/Red TX/RX LED Receive circuit upgrade. Cuts down white noise. New blue flame - faceplate decal! The radio has been tuned and aligned by a professional with the proper equipment.All you have to do is hook it up and start talking! Receive circuit improved to lower noise floor which lessens white noise.This improves the signal to noise ratio of the receiver. Much better than the stock DX94! And with the lower white noise, better signal to noise ratio than all of the other stock 94 SSB CB's! Comes with stock Mic, Heavy Duty Power cord, and bracket. Frequency counter built in and blue color. Tested before it ships so you know it'll work when you get it! Please see the pictures and video's for more information.

Specifications Model LC994v150. Frequency Range 25.165 to 28.755. Emission AM/USB/LSB. Frequency Control Phase-Lock-Loop (RCI8710-99 PLL) Synthesizer. Frequency Stability 0.001%. Temperature Range -30°C to +50°C. Antenna Impedance 50 Ohms. Antenna Connectors Standard SO-239 type. Input Voltage 13.8V DC. Size 7 3/4" (W) x 2 7/8" (H) x 10 1/4" (D). Weight 6 lb.

TRANSMITTER RF Power Output AM: 5W~40W+. USB/LSB: 100W+ PEP. Transmit Current AM: 14 Amps SSB: 25 Amps. Spurious Emission -50 dB. Unwanted Sideband -50 dB. Audio Distortion 10.% Frequency Response 300 to 2500Hz. Microphone Dynamic. Clarifier Range Coarse: ± 6.0KHz, Fine: ± 1.0KHz.

RECEIVER Sensitivity for 10 dB (S+N)/N AM: < 0.5 uV; USB/LSB: < 0.25 uV. Squelch Sensitivity < 0.5 uV. Selectivity -65 dB. Image Rejection -60 dB. AGC Figure of Merit 100 mV for 10dB Change in Audio Output. Audio Power Output 2.5W @ 10% Distortion. Audio Response 300 to 2500 Hz.

00860359002212
Accessories
Internal Amp Control
Product Description
Allows you to turn the Amp section off and just use the radio's power.

$15.00
Internal Amp Control IntAmpSw

Switch Side Mounted
Product Description
Some of the switches can also be mounted on either side just in front of the mounting bracket. Only one switch can be mounted on one side. (In other words, one per side.) *This requires holes in the sides of the cabinet covers. Some switches can be mounted on the bottom.

$25.00
Switch Side Mounted MountSwitchSide

LED Color Change
Product Description
Change the LED Displays color. This requires removing and disassembling the front of the radio.

Note; Standard does not include changing the meter color.

$125.00
LEDCOLR
Major Custom:  Color:  Radio model:  Meter Color: 
This item is currently out of stock!

TERMS:

YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.

I BELIEVE IN QUALITY BEFORE QUANTITY! (And from the sales I'm receiving, so do you!)

SO IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! Let me repeat that, IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! I SIMPLY REFUSE TO RUSH MY BUILDS.

Each radio goes through 24 hours minimum of burn-in testing when it's finished. IT WILL BE RIGHT WHEN IT LEAVES MY SHOP!

Normal turn around times;

"Major Custom radio's" 280 to 320 business days.

"Custom/Modified radio's" 45 to 60 business days depending on model.

"Stock/No option radios" are usually 1 to 2 weeks.

Depending on the difficulty of your build or the builds in front of it, this time could be longer.

"Major Custom" in this case means that you have added an option that requires a significant modification(s) to the stock radio that takes more than 3 hours to install. Such as the SP-1a, AD-203, upgrading amp deck, LesComm RCI Noise Filter, etc. are considered Major Custom builds.

"Custom/Modified" examples include LesComm Enhancements, Basic Clarifier mod, Amp Switch, Hi Cut Filter, etc. just to name a few. However if you add a lot of these small upgrades it could move your order to the "Major Custom" category.

"Stock/No option" means just that. These receive only a general tune up.

***Does not apply to Scanners. Scanners ship within 48 hours of purchase.

Customers are taking advantage of the MANY custom options we offer . Depending on the difficulty of your build OR THE BUILDS IN FRONT OF IT, this time could be longer!

There are NO REFUNDS for custom radio, amplifier or power supply orders. NO EXCEPTIONS! NO EXCEPTIONS!

SO BE SURE BEFORE YOU ORDER!

20% restocking fee on "as new, non-customized" radio returns. Radios are built AFTER they are ordered in the order of "payment" received.

AGAIN, THERE ARE NO REFUNDS OR RETURNS ON CUSTOM RADIO, AMPLIFIER OR POWER SUPPLY ORDERS, AND KITS, NO EXCEPTIONS. So be sure BEFORE you order!

This is how it works folks. When you place an order for one of our custom radios we immediately (that day) order the necessary parts needed to build that radio including the donor radio, and set them aside for your build. So we have already invested your money in your order. We do this to prevent coming up short of the parts needed because it was discontinued or changed. (Which happens a lot!) I know this is a long time folks. But I'm only one person. I will work as fast as I can, without compromising quality, to get your order out. So as it says above, if you are an impatient person, do not order from me.

YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.

We very much appreciate your business. And to all of my many, many repeat customers a very special thank you. Tells me I'm doing something right! 73 Everybody! Copyright © LestersCustomTruckShop All Rights Reserved. __________________________________________________________________________________________________________________________________________