CB Radios
Ham Radios
LesComm Kits
Repair-Mod Orders
Kit Instructions
LCTS U-tube link
LesComm LC148F-LTDII & LTD
Used & Refurbished Radios
Hornet CW Transmitters
Hornet Power Supplies

Item#: RCI2995DXCF

Product Description
*NEW* Includes Pre-Attached Heatsink Cooling Fan

Designed to enhance any serious operators shack, this rack-mounted unit offers exceptional sound quality and large, easy-to-use controls. The RCI-2995DXCF has features that include: AM-CW-FM-SSB modes of operation, variable power, noise blanker and built-in heavy duty AC power supply and provides 100+ watts PEP output, and a rear panel frequency meter output for measuring transmit operating frequency.

Features 10 and 12 Meter Bands 10 Mtr Improved Receiver Design Variable Output Power Control Ten Programmable Frequencies Receiver Clarifier (0.5kHz) Noise Blanker/ANL Circuitry Continuous Duty Built-in AC Power Supply Large Frequency Display with Dimmer New Green Backlite Display 2 Year Manufacturer Warranty (Finals are excluded) SSB in addition to AM/FM/CW An improved receiver Designed for increased sensitivity and image rejections A double FET balanced mixer For improved receiver intermodulation rejection. Surface mount components For increased resistance to shock and vibration. Variable Power Output From 100 watts to 2 watts 1/4in Headphone Jack on Front Panel Mic Gain and RF Gain Adustable microphone gain and receive distance gain controls

Specifications, Dimensions 10M Frequency Range 28.000 - 29.6999 MHz 12M Frequency Range 24.8900 - 24.9900 MHz Operating Modes CW, FM, AM, USB, LSB Frequency Control Phase-Locked-Loop Synthesizer Frequency Tolerance 0.005% Frequency Stability 0.001% Temperature Range -20�C to 50�C Antenna Connectors Standard 50ohm SO239 (aka PL259, UHF) Clarifier Range +/- 5 KHz Transmit and Receive Spurious Emissions -60dB Carrier Suppression -60dB Receiver Sensitivity AM / CW SSB Selectivity 5 db at 2 KHz, 60 db at 4 KHz Length 14in Width 19in Height 6 1/2in What's Included

Ranger RCI2995DXCF 10 and 12 Meter Base Radio 6-Pin Channel Changing Dynamic Microphone Operation/Owner's Manual

Ranger Noise Filter
Product Description
This modification was developed by Lester. You will not find it any where else. It really cuts down ambient white noise and brings out the voice frequencies.

Can be made switchable with the installation of a SPST switch. Works great with the Hi-Cut filter. Go to this video to see a demo; https://youtu.be/_iZPYDHwoWw Time 12:20. Fits the RCI2950/70DX&N models as well as the RCI69FFB/C models. (Will not fit RCI69VHP).



Top Gun CP-1
Product Description
Now the same Top Gun Compressor CP-1 circuit used in the new Magnum radios are available for most other 10-meter and many CB radios. Full tone, clear, high swing audio (AM) modulation is achieved with the Top Gun Compressor. Works in AM, FM, and SSB keeping the modulation at peak performance in all these modes. Installation is included.

Top Gun CP-1 TG-CP-1

Top Gun Tech SP-1a Speech Processor
Product Description
The SP-1a Speech Processor was developed by Clear Channel Corporation for the Ranger AR-3300 and AR3500 radios. It works well in most radios in AM FM & SSB. It is an audio processor that delivers an average of 90% modulation. It boosts lower levels to within 90% of it’s maximum output with a very low distortion. It connects in-line of the audio Mic input of the microphone jack. It also requires a 12 Volt connection in the radio. A SPST switch can be used to switch the SP-1a in and out of the circuit. When switched off the speech processor is completely out of the circuit leaving the radio back to stock audio.

Price includes installation.


Top Gun Tech SP-1a Speech Processor TGSP1a

Tune Up and Frequency Conversion
Product Description
Tune-up and frequency conversion. (Tune-up, Alignment and expanded frequency coverage) -----------------------------------------------------------------------------

Tune Up and Frequency Conversion FREQTUNE

Basic Clarifier Mod
Product Description
This option locks your TX/RX together. Makes the Clarifier control both TX/RX frequency together. Highly recommended!!! Don't be one of those guys that sounds like Mickey Mouse when he yells CQ_DX! Keep your transmitter and receiver locked together. As one that almost exclusively operates on side band, this mod is a must! It is annoying when someone QSK's into a conversation that is totally off frequency. Then everyone tells them they're off frequency but he is unable to tune his transmit to where he hears everyone else talking. So he inevitably gets ignored. With your clarifier controlling both TX & RX at the same time, where you hear operators talking is where your transmit will be sending. *

The advantage is that your transmitted signal will be on the same frequency as the signal you are receiving. I'm sure if you've heard any skip on channel 38 you've heard people that are way off from everyone else. They sound like Mickey Mouse or Donald Duck. Some are so far off frequency that you cannot even understand what they are saying. To "unlock" the clarifier means that your transmit is no longer "locked" to where it was set at the factory. It allows you to move around the channel frequency to match your receiver and where everyone else is transmitting and receiving. It also allows you to move off frequency to have a more private/quiet conversation with a friend. We sometimes move to .380 vice .385 just to have a more quiet conversation. So yes, lots of benefits. I wish everyone had their clarifier unlocked.

Deluxe increases slide range.


Basic Clarifier Mod BCM2

Your Radio Build Video
Product Description
I will create a video of your radio build.

Note; No returns on video.


Internal Amp Control
Product Description
Allows you to turn the Amp section off and just use the radio's power.

Internal Amp Control IntAmpSw

Final Transistor Upgrade
Product Description
This option includes the selected MOSFET's, their installation. Complete with Bias setting and alignment.

AT6666 uses 4.

SR955 = 4

DX98 = 11

DX99v2 = 3

DX86 = 3

Magnum 1 = 3

Lincoln II and II+ = 3


Final Transistor Upgrade FinlTrnstrUpgd
Transistor:  Number: 

TERMS: WE BUILD CUSTOM RADIOS! I BELIEVE IN QUALITY BEFORE QUANTITY! (And from the sales I'm receiving, so do you!)

SO IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! Let me repeat that, IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! I SIMPLY REFUSE TO RUSH MY BUILDS. Each radio goes through 24 hours minimum of burn-in testing when it's finished. IT WILL BE RIGHT WHEN IT LEAVES MY SHOP!

Our Build Policy; Average turn around time for "CUSTOM BUILT RADIOS" is running between 220 to 250 "business" days at present (as of Oct 2019). Customers are taking advantage of the MANY custom options we offer. Depending on the difficulty of your build OR THE BUILDS IN FRONT OF IT, this time could be longer! There are NO REFUNDS for custom radio or amplifier orders. NO EXCEPTIONS! NO EXCEPTIONS! SO BE SURE BEFORE YOU ORDER!

"Custom" in this case means that you have added an option that requires a substantial modification to the stock radio. Alignment, LesComm Enhancements and Tune ups do not constitute custom. But Max Mod, Clarifier mod, Amp Switch, Hi Cut Filter, etc. constitute Custom.

Every radio gets tuned/aligned unless you specifically say not to. So, no options radios are now 15 to 20 "business" days depending on the model (as of November 2019).

20% restocking fee on "as new, non-customized" radio returns. Radios are built AFTER they are ordered in the order of "payment" received.


This is how it works folks. When you place an order for one of our custom radios we immediately (that day) order the necessary parts needed to build that radio including the donor radio, and set them aside for your build. So we have already invested your money in your order. We do this to prevent coming up short of the parts needed because it was discontinued or changed. (Which happens a lot!) I know this is a long time folks. But I'm only one person. I will work as fast as I can, without compromising quality, to get your order out. So as it says above, if you are an impatient person, do not order from me.


Side note; We have stopped selling custom radios on ebay. Because of this I expect build times to become shorter. And our build times are slowly becoming shorter. We very much appreciate your business. And to all of my many, many repeat customers a very special thank you. Tells me I'm doing something right! 73 Everybody! Copyright © LestersCustomTruckShop All Rights Reserved. __________________________________________________________________________________________________________________________________________