Continuous channels. No skips with the +10 switch.
LesComm Deluxe Clarifier. +5 / -5
Better Dual finals.
RX/NB/AGC Schottky diode upgrade
Blue/Red TX/RX LED
Receive circuit upgrade. Cuts down white noise.
New blue flame - faceplate decal!
Continuous channels, no skips using the +10 switch. The radio has been tuned and aligned by a professional with the proper equipment.All you have to do is hook it up and start talking!
Receive circuit improved to lower noise floor which lessens white noise.This improves the signal to noise ratio of the receiver.
Much better than the stock DX98!
And with the lower white noise, better signal to noise ratio than all of the other stock 98 SSB CB's! Comes with stock Mic, New Heavy Duty Power cord, and bracket.
Frequency counter built in and blue color.
Priced to sell quick. Won't last long as proven with past radio's. Buy it now!!! Tested before it ships so you know it'll work when you get it!
Please see the pictures and video's for information. Visit LestersCustomTrkShp on youtube!
See the video; https://youtu.be/B4hnXFKSX5w
*An Amateur License is required to transmit in the Amateur bands.
You are responsible for the legal operation of your radio equipment.
This option moves the frequency range up .900MHz. Starts at 26.065 and ends at 29.655. It uses one of our tighter tolerance LesComm crystals for better frequency stability which reduces drift by a large amount. If we install it includes complete re-tune/alignment for the new frequency range.
Cuts white noise in half! It can be made switchable using a SPST switch. Go to this video to see a demo; https://youtu.be/_iZPYDHwoWw Time 12:20.
Now the same Top Gun Compressor CP-1 circuit used in the new Magnum radios are available for most other 10-meter and many CB radios. Full tone, clear, high swing audio (AM) modulation is achieved with the Top Gun Compressor. Works in AM, FM, and SSB keeping the modulation at peak performance in all these modes. Installation is included.
The SP-1a Speech Processor was developed by Clear Channel Corporation for the Ranger AR-3300 and AR3500 radios. It works well in most radios in AM FM & SSB. It is an audio processor that delivers an average of 90% modulation. It boosts lower levels to within 90% of it’s maximum output with a very low distortion. It connects in-line of the audio Mic input of the microphone jack. It also requires a 12 Volt connection in the radio. A SPST switch can be used to switch the SP-1a in and out of the circuit. When switched off the speech processor is completely out of the circuit leaving the radio back to stock audio. Price includes installation.
Allows you to turn the Amp section off and just use the radio's power.
Some of the switches can also be mounted on either side just in front of the mounting bracket. Only one switch can be mounted on one side. (In other words, one per side.)
*This requires holes in the sides of the cabinet covers.
This option locks your TX/RX together. Makes the Clarifier control both TX/RX frequency together. Highly recommended!!! Don't be one of those guys that sounds like Mickey Mouse when he yells CQ_DX! Keep your transmitter and receiver locked together.
As one that almost exclusively operates on side band, this mod is a must! It is annoying when someone QSK's into a conversation that is totally off frequency. Then everyone tells them they're off frequency but he is unable to tune his transmit to where he hears everyone else talking. So he inevitably gets ignored. With your clarifier controlling both TX & RX at the same time, where you hear operators talking is where your transmit will be sending.
This option allows you to change the color of the face decal and add limited personalization.
Upgrade your 200 watt amp board to a 400 watt amp board using 4 2SC2879 transistors. This is the same amp board used in the RCI69FFB/C4 and the RCI2970N4. Installation included in price. For new radio orders only. Must be included at time of radio purchase.
Change the LED Displays color
A special programmed LC6404 that adds computer control to the LC995v2, 994, or 998 including 3 digit display, 5 memory channels and SquelchScan. However frequency coverage is limited to 26.815 through 29.365.
A special programmed LC5304NX that adds computer control to the LC995, 994, or 998 including 3 digit display and SquelchScan. However frequency coverage is limited to 26.815 through 29.365.