Radios
Options
Accessories
Antennas
LesComm Kits
Repair-Mod Orders
Kit Instructions
LCTS U-tube link
LesComm LC148F-LTDII & LTD
Used Radios for sale

Galaxy DX98VHP (Very High Power) 10 meter Ham Radio
Galaxy DX98VHP (Very High Power) 10 meter Ham Radio
Galaxy DX98VHP (Very High Power) 10 meter Ham Radio
Item#: gadxvhipo10m
Regular price: $529.99
Sale price: $476.99

Product Description
Galaxy DX98VHP, AM/LSB/USB Big Rig Series, very high powered superior radio! This new DX98VHP radio, has been completely tuned and aligned by a professional, with the proper equipment which includes an oscilloscope and spectrum analyzer. Les has over 40 years experience in the radio field. The receiver has been improved using high speed Schottky diodes, RF transistor and I.F. Filter upgrades. Final output stages bias voltages have been correctly set, and tuned for high performance output levels without over driving. This new Galaxy radio, uses the famous EPT690011D transceiver board known for its superior performance and reliability. With over 280 peak watts of output power from the built-in amplifier, and with its very high quality audio, it will outperform many other radios in its class. The Radio features a blue five digit frequency counter and two digit channel display, dual echo, red modulation light, variable talkback, with FULL 10 meter channel functionality plus many other features. The Galaxy DX-98VHP radio is a very powerful, superior radio! Radios tuned/setup by us speak for themselves, literally! Check us out on Youtube LestersCustomTrkShp. Visit us on the web at “LestersCustoms”.

Factory specifications & more; 200 watt maximum power output (PEP) Power cord using an quick disconnect, 8 gauge wire and an AGU gold plated 50 amp fuse New larger bottom heat sink with two internal fans Blue LEDs for frequency and channel readouts Blue meter lamp on our signature large meter StarLite faceplate (backlit) Red modulation LED under the meter Side mic jack AM/USB/LSB modes Variable power output control Variable receive gain control Variable dimmer control for LEDs, meter lamp and faceplate lettering Switch to turn off the frequency digits Variable Talkback circuit with on/off switch Echo and Voice Changer with controls on the front panel Roger Beep with on/off switch Automatic SWR circuit Standard clarifier circuit Same main PC board as the DX95T2 Well packaged shipping weight is 14 lbs. TWO YEAR GALAXY WARRANTY

*An Amateur License is required to transmit in the Amateur bands. You are responsible for the legal operation of your radio equipment.
Accessories
Tune Up and Frequency Conversion
Product Description
Tune-up and frequency conversion. (Tune-up, Alignment and expanded frequency coverage) -----------------------------------------------------------------------------


Regular price: $40.00
Sale price: $35.10
Tune Up and Frequency Conversion FREQTUNE

Top Gun CP-1
Product Description
Now the same Top Gun Compressor CP-1 circuit used in the new Magnum radios are available for most other 10-meter and many CB radios. Full tone, clear, high swing audio (AM) modulation is achieved with the Top Gun Compressor. Works in AM, FM, and SSB keeping the modulation at peak performance in all these modes. Installation is included.

Regular price: $50.00
Sale price: $45.00
Top Gun CP-1 TG-CP-1

Top Gun Tech SP-1a Speech Processor
Product Description
The SP-1a Speech Processor was developed by Clear Channel Corporation for the Ranger AR-3300 and AR3500 radios. It works well in most radios in AM FM & SSB. It is an audio processor that delivers an average of 90% modulation. It boosts lower levels to within 90% of it’s maximum output with a very low distortion. It connects in-line of the audio Mic input of the microphone jack. It also requires a 12 Volt connection in the radio. A SPST switch can be used to switch the SP-1a in and out of the circuit. When switched off the speech processor is completely out of the circuit leaving the radio back to stock audio. Price includes installation.

Regular price: $110.00
Sale price: $99.00
Top Gun Tech SP-1a Speech Processor TGSP1a

Hi-Cut Filter
Product Description
Cuts white noise in half! It can be made switchable using a SPST switch. Go to this video to see a demo; https://youtu.be/_iZPYDHwoWw Time 12:20.

Regular price: $25.00
Sale price: $22.50
HiCutFilter1

Ranger/Galaxy 400 watt upgrade
Product Description
*With exchange. Upgrade your 200 watt amp board to a 400 watt amp board using 4 2SC2879 transistors. This is the same amp board used in the RCI69FFB/C4, RCI2970N4 and the LC998v800p. Installation included in price. For new radio orders only. Must be included at time of radio purchase. NOTE - TOSHIBA 2SC2879'S ARE IN VERY SHORT SUPPLY AND MAY BE DISCONTINUED AT ANY TIME!

Regular price: $350.00
Sale price: $315.00
RNGRGLXY400W
Transistor Options: 

LesComm Deluxe Ten Turn Clarifier
Product Description
Replaces the Clarifier with a 10 turn precision control. On the DX959 and 2547, adds the LesComm Deluxe clarifier Option for more slide. +/-6KCs.

Due to the size of the 10 turn potentiometer;

On the LC995v2 it replaces the Echo control.

On the LC994v100 & LC998v200 it replaces the Talkback control. Talkback is moved to the old clarifier position.

Regular price: $50.00
Sale price: $45.00
LsCmTenTurn

Internal Amp Control
Product Description
Allows you to turn the Amp section off and just use the radio's power.

Regular price: $15.00
Sale price: $13.50
Internal Amp Control IntAmpSw

Switch Side Mounted
Product Description
Some of the switches can also be mounted on either side just in front of the mounting bracket. Only one switch can be mounted on one side. (In other words, one per side.) *This requires holes in the sides of the cabinet covers.

Regular price: $20.00
Sale price: $18.00
Switch Side Mounted MountSwitchSide

Clarifier Mod
Product Description
This option locks your TX/RX together. Makes the Clarifier control both TX/RX frequency together. Highly recommended!!! Don't be one of those guys that sounds like Mickey Mouse when he yells CQ_DX! Keep your transmitter and receiver locked together. As one that almost exclusively operates on side band, this mod is a must! It is annoying when someone QSK's into a conversation that is totally off frequency. Then everyone tells them they're off frequency but he is unable to tune his transmit to where he hears everyone else talking. So he inevitably gets ignored. With your clarifier controlling both TX & RX at the same time, where you hear operators talking is where your transmit will be sending.

Regular price: $24.99
Sale price: $22.49
Clarifier Mod ClarifierMod

Ranger SRA-198 Mic
Product Description
The Ranger SRA-198 is the best sounding microphone on the market today. Ranger was out of these mics for months but now they're back! Available in both Black and Chrome! 4 pin standard mic plug to fit most Cobra's, Connex, Galaxy's, Ranger's and others. The SRA-198 is a rugged noise-canceling microphone with excellent active noise filter that cancels any unwanted, disturbing surrounding sounds. The voice response characteristic is excellent which also works well in a quiet environment.

Frequency Response : 50-15,000Hz Sensitivity : -74dB±3dB / -72db±3dB Rated output impedance : 600Ù Weight : 0.25kg Curve Cable : 1.88M 4Pin Mic Plug .

.

Regular price: $32.99
Sale price: $29.69
Ranger SRA-198 Mic SRA198B

Your Radio Build Video
Product Description
I will create a video of your radio build.

Note; No returns on video.

Regular price: $40.00
Sale price: $36.00
YourRBV1

LED Color Change
Product Description
Change the LED Displays color

Regular price: $125.00
Sale price: $112.50
LEDCOLR
Color: 

4 AWG Cable Upgrade for LesComm LC998v800p
Product Description
4 AWG Cable Upgrade for LesComm LC998v800p Includes 20' 4 AWG cable (10'Red/10'Blk), two 120 Amp Anderson Power Poles, & ANL Fuse holder with 100 amp fuse.

.

.

.

Regular price: $119.99
Sale price: $107.99
4 AWG Cable Upgrade for LesComm LC998v800p 4AWGCblUpgd

bgears 120mm high performance Fan
Product Description
HIGHLY RECOMMENDED FOR THE LC998V800P, RCI2970N2/N4/N8 AND OTHERS WITH BOTTOM AMP SECTION! YouTube Video of it in action; https://youtu.be/R9XOl5T7nd8

Auxiliary cooling fan for Galaxy, Ranger and others that have the large heatsink with shield on the bottom of the radio. Like the RCI2970N2 & N4, Galaxy DX98VHP, LesComm LC998 and many others. bgears b-120, 120mm, 2 ball bearing, high speed, high performance, 15 blades Fan . 120mm 2000 RPM 110 CFM 2 Ball Its two-ball-bearing design, 15 aerodynamic design blades ensure high speed, great cooling and silent performance. The translucent blades with four LEDs deliver a stylish appearance with an enhanced lighting effect. Great performance Running at 2000RPM and a low noise level of 37.3dBA, this 120mm fan delivers airflow of up to 110CFM for superior heat dissipation. Mounted on the bottom of the Ranger/Galaxy heat-sinks to help keep your amp cool!

Available in Black (no LEDs), Blue and Red. Price includes installation.

_________________________________________________________

Regular price: $129.99
Sale price: $116.99
bgears 120mm high performance Fan bgearsb-PWM120
Color:  Switching: 

High Speed Fan Upgrade
Product Description
9.6CFM Hi Speed 7000 RPM Dual Ball Bearing Fans to replace the internal fans on the Galaxy and Ranger Amp sections.

.

Regular price: $47.00
Sale price: $42.30
High Speed Fan Upgrade HiSpdFan
Installation: 

WE BUILD CUSTOM RADIOS! I BELIEVE IN QUALITY BEFORE QUANTITY! (And from the sales I'm receiving, so do you!) SO IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! Let me repeat that, IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! I SIMPLY REFUSE TO RUSH MY BUILDS. Each radio goes through 24 hours minimum of burn-in testing when it's finished. IT WILL BE RIGHT WHEN IT LEAVES MY SHOP! Our Build Policy; Average turn around time for "CUSTOM BUILT RADIOS" is running between 180 to 220 days at present (May 2018). Customers are taking advantage of the MANY custom options we offer. Depending on the difficulty of your build OR THE BUILDS IN FRONT OF IT, this time could be longer! There are NO REFUNDS for custom radio orders. NO EXCEPTIONS! NO EXCEPTIONS! SO BE SURE BEFORE YOU ORDER! Every radio gets tuned/aligned unless you specifically say not to. So, no options radios are usually 10 to 20 business days depending on the model. 20% restocking fee on "as new, non-customized" radio returns. Radios are built AFTER they are ordered in the order of "payment" received. AGAIN, THERE ARE NO REFUNDS OR RETURNS ON CUSTOM RADIO ORDERS, NO EXCEPTIONS. So be sure BEFORE you order! This is how it works folks. When you place an order for one of our custom radios we immediately (that day) order the necessary parts needed to build that radio including the donor radio, and set them aside for your build. So we have already invested your money in your order. We do this to prevent coming up short of the parts needed because it was discontinued or changed. (Which happens a lot!) I know this is a long time folks. But I'm only one person. I will work as fast as I can, without compromising quality, to get your order out. So as it says above, if you are an impatient person, do not order from me. Side note; We have stopped selling on ebay. Because of this Lester expects build times to become shorter. And our build times are slowly becoming shorter. We very much appreciate your business. And to all of my many, many repeat customers a very special thank you. Tells me I'm doing something right! 73 Everybody! Copyright © LestersCustomTruckShop All Rights Reserved. __________________________________________________________________________________________________________________________________________________________